T8 Series
Material choice
- The thickness of the T8 series screen is 60mm.
- The T8 series office cubicle workstation is made of 1.3-3.0mm thick aluminum.
Electricity wires management
- We installed the cable channel in the middle and bottom positions of the partition
to facilitate the staff to install the power cable and data cable separately, so as to
avoid the interference of the magnetic field generated by the power line.
- The cable channel can be opened by turning up or down, and can be taken out
directly. The socket can be installed by opening holes as required.
- The incoming wires of the partition can be arbitrarily routed from the ground, wall
and ceiling, and the internal wiring of the partition can be interconnected between
two layers of cable channel.
Power supply socket
- 86 type switch socket and American socket can be installed on the cable channel
to meet the power demand customization of different countries.
Simple splicing
- The partition and the partition are installed by interlocking, without any screws,
and the installation is convenient and fast.
_glass.jpg){kind=link}
_glass.jpg){kind=link}
Flexible Design
Adjust the desktop height at will
- We install the partition bracket on the vertical pole, and can adjust different desktop heights according to needs.
Hanger installation
- The hanging slots of the mid bar of the T8 series cubicle workstation support employees to put the pendants on and help them store their office supplies.
Keep level with the ground
- The bottom of each partition is equipped with 2 adjustable feet to solve the problem of uneven ground.
Privacy Protection
Overlay function
- T3/T8/T10 all support the panel stack on function. Different colors or materials can be
selected for different panels. Increase/decrease the module height to keep the privacy
of the office environment, so that the office workstation presents a variety of changes.
Choice
Partition Finish
- Fabric: 107 colors available
- MFC tile: 13 options
- Glass: transparent glass / frosted glass / colored glass
- Metal tile
- Whiteboard
- Acoustic panel
- Pin board
- Magnetic board
The above are regular options. If you have special needs,
we welcome customization.
Packaging Logic
- We use the method of disassembling to carry out flat packing, reducing the space utilization by 80%, thereby reducing the freight cost.
- We split the components of office furniture into A.B.C.D.E package, so we can quickly find a component when looking for it.
- We mark the basic information such as floor, area, color, size, 3D drawing, etc. on the outside of the package of each product element, so that the product is easier to identify and load and unload.
- The bubble wrap and corner protector inside the package can protect the product from damage caused by transportation.
