T10 Series
Material choice
- The thickness of the T10 series partition: 83mm
- T10 series office cubicle workstation adopts 1.3-3.0mm thick aluminum.
Electricity wires management
- We installed the cable channel in the middle and bottom positions
of the partition to facilitate the staff to install the power cable and
data cable separately, so that it can avoid the interference of the
magnetic field generated by the power line to the data signal.
- The cable channel can be opened by turning up or down, and
can be taken out directly. The socket can be installed by opening
holes as required.
- The incoming wires of the partition can be arbitrarily routed from
the ground, wall and ceiling, and the internal wiring of the partition
can be interconnected between two layers of cable channel.
Power supply socket
- 86 type switch socket and American socket can be installed on
the cable channel to meet the power demand customization of
different countries.
Simple splicing
- Hanging tiles installation is adopted between the partition and
the partition,without any screws. When the tiles or glass is
accidentally damaged, it is not necessary to remove the partition,
just replace the damaged part directly.
