What's The Consititution ?
60% covered of Ployester Fiber sound absorbing material,
meets requirement of NSUL MARSHALL ACOUSTIC
acoustics simulation design.
Noise reduction ability
1.Firmly sealed
Dual sealing strap on door frameand glass edge
ensures a tight seaand minimizes sound leakage
2.Low-frequency blocked
Dampening materialis used be-tween feet and
floor to reduce the structure-borne Low-frequency
transmission.
3.Composition of wall
The side wall of our acoustic boothconsists of
multiple layers of acous-tic material, specifically
designed to effectively block and absorb sound
4.Reinforced transparency
Laminate glass is used for bettersound proofing
while keeping the transparency
Easy to assemble, move and extend
Born for the changing office need
In a mere 1hour,a new booth will appearin your office with the work of minimal
2people(S model.The modular designenables a swift installation process.
Thisefficient setup requires no trimming, bolt-ing, or gluing, no waste generated
duringinstallation process, all packaging mate-rials can be recycled,allowing
immedi-ate use
Dimmer controller
Ventilation
> Short press button to turn on when off.
> Short press button when ventilation is on, the button switch
to white. Turn the kno to adjust
Light strength
> Short press button to turn on when off.
> Short press button when light is on, the button switch to white.
Turn the knob to adjust
> Long press button for 2 seconds to turn off
Light temperature
> Short press button when light is on, the button switch to white.
Turn the knob to adiust;
Power
> Short press button to turn on both ventilation and light when off.
> Short press button to turn off both ventilation and light when on,
the IR sensor will be disabled for 30seconds;
> Long press button for 5 seconds when off, IR sensor will be
disabled and all device will be on.Shortpress will turn off and resume
default.
> Long press button for 5 seconds when on,IR sensor will be disabled
and all device will be off. Shortpress will turn on and resume default
