Features
Electricity wires management
- We installed the cable channel in the middle and bottom positions
of the partition to facilitate the staff to install the power line and data
line separately, so as to avoid the interference of the magnetic field
generated by the power cable to the data signal.
- The cable channel can be opened by turning up or down, and can
be taken out directly. The socket can be installed by opening holes
as required.
- The incoming wires of the partition can be arbitrarily routed from
the ground, wall and ceiling, and the internal wiring of the partition
can be interconnected between two layers of cable channel.
Power supply socket
- 86 type switch socket and American socket can be installed on
the cable channel to meet the power demand customization of
different countries.
- If the thickness of the partition is less than 40mm, we recommend
using 86 type switch socket to satisfy the aesthetic feeling and ensure
the safety of electricity use.
Flexible Design
Combination selection
We support the connecting of partitions of different thicknesses to make the combination varied.
- C20+C40/C50/C60
- C32+C50/C60
- C40+C60
- T3+T8/T10
Privacy Protection
Overlay function
- T3/T8/T10 all support the panel stack on function. Different colors or materials can be
selected for different panels. Increase/decrease the module height to keep the privacy
of the office environment, so that the office workstation presents a variety of changes.
Partition Finish
- Fabric: 107 colors available
- MFC tile: 13 options
- Glass: transparent glass / frosted glass / colored glass
- Metal tile
- Whiteboard
- Acoustic panel
- Pin board
- Magnetic board
The above are regular options. If you have special needs,
we welcome customization.
Packaging Logic
- We split the whole package into bulk to achieve flat packing, reducing the space
utilization by 80% and reducing the freight cost.
- The elements of office furniture are split into A.B.C.D.E package, so that components
can be quickly found.
- In order to make the product easier to identify, load and unload, we mark the floor,
area, color, size, 3D drawing and other basic information on the outside of the package
of each product element.
- In order to protect the product from damage caused by transportation, we equip
bubble wrap and corner protector inside the package.
