EN

Private Cubicle

MW-T10

T10 Combination

office_cubicle-BANNER-T10_Combination-3.jpg
office_cubicle-BANNER-T10_Combination-2.jpg
office_cubicle-BANNER-T10_Combination-1.jpg
Contact Us
office_cubicle-BANNER-T10_Combination-3.jpg
office_cubicle-BANNER-T10_Combination-2.jpg
office_cubicle-BANNER-T10_Combination-1.jpg

The T10 office workstation adopts 83mm thick screen to provide employees with enough sense of security.

  • Corner convnection
  • Cable channel
  • Partition connection
  • Hanging bracket
  • Hanging plate installation
  • End trim
  • Accessory rail
  • Vertical pole
  • Wires from ceiling
modern cubicles,modern office cubicles,modern office partitions

T10 Series

Material choice

  • The thickness of the T10 series partition: 83mm
  • T10 series office cubicle workstation adopts 1.3-3.0mm thick aluminum.


Electricity wires management

  • We installed the cable channel in the middle and bottom positions

of the partition to facilitate the staff to install the power cable and

data cable separately, so that it can avoid the interference of the

magnetic field generated by the power line to the data signal.

  • The cable channel can be opened by turning up or down, and

can be taken out directly. The socket can be installed by opening

holes as required.

  • The incoming wires of the partition can be arbitrarily routed from

the ground, wall and ceiling, and the internal wiring of the partition

can be interconnected between two layers of cable channel.


Power supply socket

  • 86 type switch socket and American socket can be installed on

the cable channel to meet the power demand customization of

different countries.


Simple splicing

  • Hanging tiles installation is adopted between the partition and

the partition,without any screws. When the tiles or glass is

accidentally damaged, it is not necessary to remove the partition,

just replace the damaged part directly. 

modern cubicles,modern office cubicles,modern office partitions

Flexible Design

Adjust the desktop height at will

  • We install the partition bracket on the vertical pole, and can adjust different desktop heights according to needs.

 

Hanger installation

  • The T10 series cubicle workstation can be configured with a hanging slot board to support employees to put the hanging parts on, so as to facilitate the storage of their office supplies.

 

Keep level with the ground

  • The bottom of each partition is equipped with 2 adjustable feet to solve the problem of uneven ground. 

Privacy Protection

Overlay function

  • T3/T8/T10 all support the panel stack on function. Different colors or materials can be

selected for different panels. Increase/decrease the module height to keep the privacy

of the office environment, so that the office workstation presents a variety of changes. 

modern cubicles,modern office cubicles,modern office partitions

Choice

Partition Finish

  • Fabric: 107 colors available
  • MFC tile: 13 options
  • Glass: transparent glass / frosted glass / colored glass
  • Metal tile
  • Whiteboard
  • Acoustic panel
  • Pin board
  • Magnetic board

 

The above are regular options. If you have special needs,

we welcome customization. 

modern cubicles,modern office cubicles,modern office partitions

Packaging Logic

  • We split the whole package into bulk to achieve flat packing, reducing the space

utilization by 80% and reducing the freight cost.

  • The elements of office furniture are split into A.B.C.D.E package, so that components

can be quickly found.

  • In order to make the product easier to identify, load and unload, we mark the floor,

area, color, size, 3D drawing and other basic information on the outside of the package

of each product element.

  • In order to protect the product from damage caused by transportation, we equip

bubble wrap and corner protector inside the package.

modern cubicles,modern office cubicles,modern office partitions