Features
Make it easy to change the size
- Length to adjust: 1200mm-1800mm
- Pulling adjustable connecting bar makes it possible to be all the size/height of
the desk frame you want.
- If you have this product in stock, you will have various sizes of desk frame because
of the changable length.
Electricity wires management
- Disorderly wires will make the desktop look untidy and affect the work efficiency
of employees. Considering this problem, we hide the power cable and data cable,
which will not affect the use but also make the work place cleaner.
- The magnetic field generated after the power cable is energized will weaken
the signal of the surrounding data cables. We recommend using Keel Tray to
separate these two kinds of wires to maintain the stability of the signal.
Getting the power from the single desk
- We design a power box on the table top of the workstation to make sure that
each employee can use power and data in their own working space.
_glass.jpg){kind=link}
_glass.jpg){kind=link}
Table Leg Design
Solutions for table leg
- Different types of table legs for the same office benching workstation can be changed freely.
- Inspite of plastic, 3mm thick die-cast alumium were used to make the adjustable foot, because the fragile nature of plastic makes it possible to burst when the temperature changes.
Technological Design
- The suspended design between table top and table frame makes the silhouette of office system clearer.
- We use Dual-head saw to make 45°cutting, then spliced them into rectangles. Finally, we weld and polish them.
Optional Accessory
- There are four kinds of screens on the desk, namely, writing board, pin board, accessory rail and magnetic board.
- The single steel drawer fixed at the bottom of the table can store small objects.
- There are many types of lockers for users to choose from.
Packaging Logic
- We use the method of disassembling to carry out flat packing, reducing the space
utilization by 80%,thereby reducing the freight cost.
- We split the components of office furniture into A.B.C.D.E package, so we can
quickly find a component when looking for it.
- We mark the basic information such as floor, area, color, size, 3D drawing, etc.on the
outside of the package of each product element, so that the product is easier to identify and load and unload.
- The bubble wrap and corner protector inside the package can protect the product
from damage caused by transportation.
